The author does not spend a long time going over compression and the rationale behind using this and other effects, so if you are new to this subject it may be a good idea to learn the basics of eq, compression etc. 2.Then Add Stereo Audio track in the Project window. Now mute this track and create a pre-fader send for each of the mono tracks. microphones), set Configuration to Mono and Count to 2.
If you need stereo connections going into Cubase (e.g. You can change the track in Cubase to mono. All versions of Cubase share the same pristine sound quality and ease of use that make Cubase one of the world’s most popular recording and production solutions. The Stereo group will now be the "Master", set the outputs for anything that goes to the main out to this group instead. The other settings here allows you to export the project as a mono file, export it in realtime so Cubase will play it back in realtime while exporting. mixer output, stereo synth), set Configuration to Stereo and Count to 1. Try changing your VST connections input and output tabs under "Devices" to all mono, then change …
mixer output, stereo synth), set Configuration to Stereo and Count to 1. VST is a fabulously scalable system, able to function on anything from low-powered machines that lack dedicated low-latency audio hardware, all the way to high-powered, multi-core, multi-processor behemoths connected to banks of high-quality audio I/O. Cubase’s routing capabilities are determined by the underlying Virtual Studio Technology on which it’s built.
I'm using Cubase 5 on Windows 7 with a usb fasttrack m-audio recorder drive. The main reason for checking the derived mono from a stereo mix is to make sure it still works for mono listeners, and there can be a lot of them. Under Bus Name you can rename your Input Bus; in our example we have called it Additional Bus. Thanks. jcb08j, Dec 28, 2011 #1. djmukilteo Well-Known Member.
Split Channels will export the left and right channels of the Stereo Output to separate audio files. If you want to make your output Stereo with a Mono input, please follow the steps below: 1.In the VST Connections > Input, Add a Mono Bus. Compare the versions of Cubase. Once you’ve perfected your mixes and have created a collection of unmastered files for your montage, Cubase offers a few different approaches, but all start by importing your unmastered mixes into a new project and laying them out on the timeline. VST is a fabulously scalable system, able to function on anything from low-powered machines that lack dedicated low-latency audio hardware, all the way to high-powered, multi-core, multi-processor behemoths connected to banks of high-quality audio I/O. Rated 5.0 out of 5 by Rob2112 from Great Overview This is a good overview of the mixing functions within Cubase. Also, Cubase has a plugin that will do this, better actually -- the Control Room button IMO doesn't give an accurate mono sum of a stereo channel. Even if it just comes out of one speaker. microphones), set Configuration to Mono and Count to 2. As an Input, select the Mono In, you just created. I believe the plugin is the mono-to-stereo one -- it has a "mono" button and if you make it an insert, you could map the bypass for the insert to a key (or controller button) If you need stereo connections going into Cubase (e.g.